User`s guide

Agilent B2900 User’s Guide, Edition 2 5- 5
Front Panel Operations
Configuring Various Settings
Configuring Various Settings
This section describes how to configure various settings apart from the source
output and measurement functions.
• “Setting the Power Frequency”
• “Resetting to the Initial Settings”
• “Setting the Beeper”
• “Setting the Date and Time”
• “Performing the Self-Test”
• “Performing the Self-Calibration”
• “Setting the Operations at Power On”
• “Displaying the Error Message”
• “Clearing the Error Buffer”
• “Clearing Timestamp”
• “Setting the Automatic Clear of Timestamp”
• “Displaying the Firmware Revision”
• “Setting the GPIB Address”
• “Setting the Remote Control Command Set”
• “Setting the Remote Display Mode”
Setting the Power Frequency
1. Press the More > System > PLC function keys.
2. Press 50 Hz or 60 Hz. To cancel the setting change, press the Cancel/Local key.
Resetting to the Initial Settings
1. Press the More > System > Reset function keys.
The Confirmation dialog box is displayed.
2. Press OK to reset. To cancel the operation, press the Cancel/Local key.