User`s guide

Agilent B2900 User’s Guide, Edition 2 4- 49
Front Panel Reference
System key group
System key group
Pressing the System key displays the following nine softkeys used for several
system setups.
Error Displays the following two softkeys to view or clear errors.
Log Displays the Error Log dialog box which displays the SCPI
errors.
Clear Clears the error buffer immediately.
Reset Initializes the B2900.
Pressing the Reset softkey displays a confirmation dialog box. Press the OK softkey
to start initialization, or the Cancel/Local key to cancel.
Cal/Test Displays the following two softkeys for performing self-calibration or self-test.
Self-Cal Performs self-calibration.
Self-Test Performs self-test.
Pressing the softkey displays a confirmation dialog box. Press the OK softkey to
start self-calibration or self-test, or the Cancel/Local key to cancel.
PLC Displays the following two softkeys to specify the power line frequency. The
present setting is indicated by an asterisk on the softkey label.
50 Hz Specifies the power line frequency 50 Hz.
60 Hz Specifies the power line frequency 60 Hz.
Timestamp Displays the following two softkeys to clear timestamp.
Clear Clears the timestamp. Pressing this softkey displays the
confirmation dialog box. Press the OK softkey to clear the
timestamp, or the Cancel/Local key to cancel.
Auto CLR Displays the following two softkeys for setting the automatic
clear of the timestamp. The present setting is indicated by an
asterisk on the softkey label.
OFF Disables the automatic clear of the timestamp.
ON Enables the automatic clear of the timestamp.