User`s guide

4- 46 Agilent B2900 User’s Guide, Edition 2
Front Panel Reference
I/O key group
LAN Configuration dialog box
This dialog box provides the following parameters for setting the configuration of
the LAN interface.
mDNS mDNS (multicast DNS) status, ON or OFF
IP Address Config. IP address configuration, AUTO or MANUAL
AUTO configuration uses the DHCP server.
IP Address IP address of this instrument, used for the MANUAL IP
address configuration
Subnet Subnet mask, used for the MANUAL IP address
configuration
Gateway IP address of gateway, used for the MANUAL IP address
configuration
DNS Server Config. DNS server configuration, AUTO or MANUAL
DNS Server IP address of DNS server, primary and secondary, used
for the MANUAL DNS server configuration
Hostname Host name of this instrument
WINS Server IP address of WINS server, primary and secondary
DIO Configuration dialog box
This dialog box provides the following parameters for setting the configuration of
the Digital I/O interface.
Pin # Digital I/O pin number, 1 to 14
This field specifies the pin set by this dialog box.
Function Function of the specified pin of the Digital I/O interface,
digital signal input/output (DIGITAL I/O), digital signal
input (DIGITAL IN), trigger output (TRIGGER OUT),
trigger input (TRIGGER IN), or high voltage state
(HIGH VOLTAGE LAMP, HI-VOLT LAMP, only for
pin 14)
If Function is set to HIGH VOLTAGE LAMP, other
setup parameters on this dialog box is ignored.
Polarity Polarity of the input/output function, positive
(POSITIVE, POS.) or negative (NEGATIVE, NEG.)