Technical data

2- 62 Agilent B2900 SCPI Command Reference, Edition 2
Subsystem Command Summary
Using Advanced Functions
Table 2-22 STATus Subsystem
Command Summary Reset setting
:STAT:MEAS:COND?
:STAT:OPER:COND?
:STAT:QUES:COND?
Returns the value of the measurement,
operation, or questionable status
condition register.
:STAT:MEAS:ENAB mask
:STAT:OPER:ENAB mask
:STAT:QUES:ENAB mask
:STAT:MEAS:ENAB?
:STAT:OPER:ENAB?
:STAT:QUES:ENAB?
Sets the measurement, operation, or
questionable status enable register.
mask=0 to 65535 (decimal)
0
:STAT:MEAS[:EVEN]?
:STAT:OPER[:EVEN]?
:STAT:QUES[:EVEN]?
Returns the value of the measurement,
operation, or questionable status event
register.
:STAT:MEAS:NTR filter
:STAT:OPER:NTR filter
:STAT:QUES:NTR filter
:STAT:MEAS:NTR?
:STAT:OPER:NTR?
:STAT:QUES:NTR?
Sets the negative transition filter in the
measurement, operation, or questionable
status register. If you set a bit of the filter,
a 1-to-0 transition of its register bit sets
the corresponding bit of the event
register.
filter=0 to 65535 (decimal)
0
:STAT:MEAS:PTR filter
:STAT:OPER:PTR filter
:STAT:QUES:PTR filter
:STAT:MEAS:PTR?
:STAT:OPER:PTR?
:STAT:QUES:PTR?
Sets the positive transition filter in the
measurement, operation, or questionable
status register. If you set a bit of the filter,
a 0-to-1 transition of its register bit sets
the corresponding bit of the event
register.
filter=0 to 65535 (decimal)
32767
:STAT:PRES
Sets all defined bits in the status system’s
PTR registers and clears the all bits in the
NTR and Enable registers. The registers
are returned to the default condition.