Technical data

Module 10
Creating Your Test Definitions
10-11
To Define Test Contents
4. Select available element
3. Specify the line
to insert element
or to be edited
5. Click Insert or
desired button
2. Define the local variables used
in this test contents
6. Define the setup required for
the highlighted line (element)
1
Starting to define the test contents:
1. Highlight the Local Variables Definition line.
2. Define the local variables used in this test contents (test execution flow).
3. Highlight the line that an element has to be inserted.
4. Highlight an element of Program Component, Application Test, Analysis, Classic Test,
Miscellaneous, or My Favorite Setup tab menu.
5. Click the Insert button of the Edit tab menu. The element will be inserted between the highlighted
line and the next line.
6. Define the required setup.
To edit the test contents:
1. Optional. Highlight the Local Variables Definition line.
2. Optional. Define the local variables used in this test contents (test execution flow).
3. Highlight the line to be edited.
4. Highlight an additional element if you need.
5. Click the desired button if you need.
6. Define the required setup if you need.
Repeat this to create the test contents (test execution flow).