Technical data

Agilent 41000 Administration Guide, Edition 3 4- 5
Agilent iPACE Verification Tool
iPACE Verification Tool Window
Verification Tab
Executes the connection check, noise offset measurement, or settling time/leakage current
measurement.
Test Item Selects the measurement item to perform.
Connection Path connection check
Noise noise offset measurement
Settling/Leak settling time/leakage current measurement
Source Selects the voltage source (voltage output unit).
Input Port Specifies the port number of the switch mainframe input port
connected to the voltage source.
Output Slot Specifies the slot number of the mainframe card slot that installs the
switch module used for the measurement path.
Output Ch Specifies the port number of the switch module output that will be the
end of the measurement path.
Run Starts the specified measurement.
Break Aborts the measurement execution.
Figure 4-3 Verification Tab