Technical data

Agilent 41000 Administration Guide, Edition 3 4- 3
Agilent iPACE Verification Tool
Set Configuration Window
Set Configuration Window
This window is used to set the system configuration of the Agilent 41000.
GPIB Name Selects the VISA name of the GPIB interface.
Instrument Selects the instrument.
Check the check box of the left side. Then the Instrument combo box
will be active.
GPIB Address Selects the GPIB address of the instrument set to the Instrument
combo box.
OK Completes the configuration setup, and closes the Set Configuration
window.
Cancel Cancels the setup, and closes the Set Configuration window.
Figure 4-1 Set Configuration Window
'#'$
#
$:#