Technical data

Agilent 41000 Administration Guide, Edition 3 3- 29
Using Agilent iPACE Verification Tool
Using Batch Mode
To Create B atc h Fi le
Open the ‘iPACE Verification Tool’ window, and perform the following step.
1. Click the ‘Batch’ tab.
2. Click Open.... The ‘Open Batch File’ window appears.
On the ‘Open Batch File’ window, select the batch file to use, and click Open.
The ‘Open Batch File’ window will be closed. And the selected file name will be
displayed in the ‘Batch File Name’ field.
3. Click Edit.... Then the Notepad will open. And it will show the code of the batch file.
4. Edit the batch file as you like.
See Table 3-3 for the meaning of parameters.
5. Save the batch file as the new file name.
NOTE Creating Tips
If plural test items are defined in a batch file, a dialog box will open at the beginning of
each test item. The dialog box will prompt you for the test fixture setup.
To avoid this interrupt, it is recommended to create a batch file for each test item.