Technical data

In This Manual
This manual provides the following information of the Agilent 41000 Series Integrated
Parametric Analysis and Characterization Environment (Agilent
iPACE).
• Chapter 1, “Introduction.”
Describes product overview, specifications, accessories, and options of the Agilent 41000.
• Chapter 2, “Installation and Operation.”
Explains how to install the Agilent 41000 and how to operate the Agilent 41000 system
cabinet.
• Chapter 3, “Using Agilent iPACE Verification Tool.”
Explains how to use the Agilent iPACE Verification Tool.
• Chapter 4, “Agilent iPACE Verification Tool.”
Describes the reference information of the Agilent iPACE Verification Tool.
• Chapter 5, “Measurement Techniques.”
Describes measurement techniques to perform low current measurement, low resistance
measurement, accurate capacitance measurement, and so on.
• Chapter 6, “Probe Card Interface.”
Describes product overview, specifications, accessories, and options of the Agilent
B2220A Probe Card Interface. The probe card interface is a system component of the
Agilent 41000 Model 300 and 400.
• Chapter 7, “Service.”
Describes the service information of the Agilent 41000.
NOTE Other Manuals
For details of system components (instruments), see the manual of each instrument.
For details of the Agilent I/CV software, see its on-line manual.