Technical data

Agilent 41000 Administration Guide, Edition 3 3- 5
Using Agilent iPACE Verification Tool
Installation
Installation
This section explains how to install the Agilent iPACE Verification Tool.
• “System Requirements”
• “Installation Procedure”
System Requirements
The following system environment is required to execute the Agilent iPACE verification
tool.
•Operating System
Microsoft Windows 2000 or Windows XP Professional
• Agilent GPIB (IEEE 488) Interface and Agilent IO Libraries M.01.01.04
Agilent 82357A USB/GPIB interface, E5810A LAN/GPIB gateway, 82350B GPIB
interface, or equivalent. These models include Agilent IO libraries.
• Computer and peripherals
Minimum Requirements:
CPU Intel Pentium or compatible processor, 300 MHz
Memory 128 Mbyte
Hard disk 20 Mbyte free space
CD-ROM drive is needed to install the Agilent iPACE verification tool.
Note PC furnished with the controller option satisfies the minimum requirements.
• Supported Instruments (Agilent 41000 iPACE system component)
• DC source/monitor: Agilent 4155C, 4156C, E5270B, or E5270 series
• Capacitance meter: Agilent 4284A
• Switching matrix: Agilent B2200A, B2201A, or E5250A
NOTE If you modify the source code of the Agilent iPACE Verification Tool
The following software are required to modify the source code of the Agilent iPACE
verification tool.
• Microsoft Visual Basic.NET version 2003
• Agilent T&M Programmers Toolkit for Visual Studio.NET (W1140A or equivalent)
If you want, prepare and install the software.