Technical data

Agilent 41000 Administration Guide, Edition 3 1- 13

Introduction

Specifications

The specifications are the performance standards or limits against which these units have

been tested. The supplemental information is not warranted, but provides useful

information about functions and performance.

Basic Functions • Probe card direct docking mechanism (Model 300/400)

• High resolution DC measurement

• High resolution capacitance measurement (with Agilent 4284A)

• High performance resource switch capability (with Agilent E5288A for Model 100,

with Agilent B2200 for Model 200/300/400)

• Pulsed force/measure (Model 200/300/400 with Agilent 41501B)

• PC-based instrument control via a GUI (with Agilent I/CV)

Configurations: • Output pins: 24 or 48 pins (Model 300/400)

• Input ports: 8 triaxial ports (0 to 4 ports selectable Kelvin input) and 6 coaxial ports

(Model 200/300/400)

• Analyzer: Agilent E5270B, 4156C (Model 200/300/400), or 4155C (Model 400)

• Additional instruments: Optional

• Agilent 4284A Precision LCR Meter (as 1 MHz CMU)

• Agilent 41501B SMU and Pulse Generator Expander (for 4155C/4156C)

• PDU (with EMO): Optional

• Measurement controller: Optional

• Measurement control software: Optional

• Agilent I/CV 3.0 (E5240C)

• Agilent I/CV 3.0 Lite (E5241C)

• Furnished software:

Measurement path control and path characteristics measurement software

(Agilent

iPACE Verification Tool)

• Furnished accessories:

Connection cables between instruments

Specification

Condition:

If not noted otherwise, the conditions for specifications and supplemental information are

as follows.

• Temperature: 23 ° C ± 5 ° C

• Relative Humidity (R.H.): 60 % and bellow

System components reference to the specification of each product.