Technical data
7- 26 Agilent 41000 Administration Guide, Edition 3
Service
Replacement Procedure
To Remove Measurement Cables
1. Disconnect the measurement cables from instruments.
2. Remove screws that fix the cable-through-panel to the system cabinet. Then use a plus
screwdriver (H2).
3. Slide the cable-through-panel to the front side a little.
4. Remove screws that fix the cable-through-panel to the cable-tray. Then use a pozidrive
screwdriver (PZ1), and remove the cable-through-panel.
5. Remove cables from the cable-through-panel.
Figure 7-16 Removing Measurement Cables
%CDNGVTC[