Technical data

Agilent 41000 Administration Guide, Edition 3 6- 9

Probe Card Interface

Specifications

This section lists complete specifications and supplemental information of the Agilent

B2220A. The specifications are the performance standards or limits against which the

B2220A is tested. When the B2220A is shipped from the factory, it meets the

specifications. The supplemental information are not specifications but are typical

characteristics included as additional information for the operator. The “supplemental

information” and “typical” entries, in the following specifications are not warranted, but

provide useful information about the functions and performance of the instruments.

Input/Output

Agilent B2220A has the following inputs and outputs:

• B2220A-024

• 24 inputs: triaxial connector (force/guard/common or sense/guard/common)

• 24 outputs: contact pin (force/guard or sense/guard)

• B2220A-048

• 48 inputs: triaxial connector (force/guard/common or sense/guard/common)

• 48 outputs: contact pin (force/guard or sense/guard)

General Specifications

• Operating temperature: 5 ° C to 35 ° C (non-condensing)

• Operating humidity: 5 % to 70 % Relative Humidity (non-condensing)

• Storage temperature: -20 ° C to 60 ° C (< 80 % RH, non-condensing)

• Weight: approximately 15 kg (body only)

•Dimensions (W × H × D, in mm):

389 × 172.4 × 373.2 (without connectors, handles, guide pins, contact block)

389 × 224.9 × 373.2 (without connectors, handles, guide pins, contact pins)

• Regulatory Compliance:

Safety: IEC 61010