User`s guide

5- 44 Agilent B1500 User’s Guide, Edition 7
Classic Test Definition
Auto Analysis Setup
• “Regression line”: For drawing a regression line by using the measurement data
included in the area specified by any two po
ints.
Marker This area sets the marker automatically displayed
and moved to the specified
position after the measurement.
Enable Check this box to enable the marker.
Condition Enter a variable name and a condition expression to specify
where you want the marker to appear
.
After Check this box to enable the additional condition.
Enter a second variable and condition expression. This sets up a
search start con
dition for finding specified point.
For example, you can specify the following expressions to
search for a measurement
point that satisfies the first condition after the second condition is satisfied.
Condition:[DGM]=[MAX(DGM)*0.01] [x] After [DGM]=[MAX(DGM)]
Normal line The First Point area and the Second Point area are used to s
pecify the points the line
passes through. The following two ways are available to specify the point.
• X-Y Coordinate
Enter the desired X-Y coordinate values or expressions in the X and Y fields.
• Data Condition
Enter a variable name and condition expression to specify the point. This is the
s
ame method as s
pecifying the Marker point.
Gradient line The First Point area is used to specify the point t
he line pa
sses through. The
following two ways are available to specify the point.
• X-Y Coordinate
Enter the desired X-Y coordinate values or expressions in the X and Y fields.
• Data Condition
Enter a variable name and condition expression to specify the point. This is the
s
ame method as s
pecifying the Marker point.
In the Gradient field, enter a gradient value or expression.