User`s guide

Agilent B1500 User’s Guide, Edition 7 4- 15
Using EasyEXPERT
Main Screen
Standby ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the standby function is enabled (standby mode is ON).
Multi Display ON This indicator is located at the bottom of the EasyEXPERT main screen and is lit
while the Multi Disp
lay function is enabled.
workspace name Field below the Results button shows the present workspace name.
Results This button provides the following functions. The list area s
hows the test records.
The up or down arrow button is used to expand or reduce the list area.
Cancel Closes the menu.
Select All Selects all records.
Unselect All Unselects all records.
Display Data Opens the “Data Display (page 4-51)” and displays the
test result data of the selected record. Up to 15
w
indows can be
opened by this function.
Recall Recalls the test setup of the selected record.
Filter Provides the following four functions.
Show Deleted Data Check this function to see the test records of both
S
ave-group
and Delete-group. To set the data group,
see “Flag and Remarks” on page 4-17. See also “Test
Result Editor (page 4-21)”.
Filter... Opens the “Test Results Data Filter (page 4-22)” dialog
box. You can filter the test records in the list area.
Expand Application Test
Results Check th
is function to see all test records created
by the
test setups defined in an application test.
If a test record is exported when this function is not
checked, the expo
rted file will contain all records
created by the test setups defined in an application test.
However, if the test record is exported by the Export
As Text File function, the exported file will contain
only the test record of the application test.