Technical data

4 Disassembly
44 U2761A Service Guide
General Disassembly
This chapter provides the step-by-step guide to dismantle the
module. To reassemble the module, follow the instructions in
reverse order.
The removable assemblies include the following.
• Front and back bumpers
• Metal casing
• Rear metal casing
• Front metal casing, which is attached to the carrier board
and measurement board
Disassembly Instructions
Follow the instructions in this section to disassemble the
U2761A.
NOTE
The parts shown in the following figures are representative and may look
different with what you have in your module.
Remove the two bumpers from the
metal casing.