Technical data

89
Agilent U2761A USB Modular Function/Arbitrary Waveform Generator
Programmer’s Reference
Agilent Technologies
8
Frequency Sweep Commands
[SOURce:]FREQuency:STARt 90
[SOURce:]FREQuency:STOP 91
[SOURce:]SWEep:SPACing 92
[SOURce:]SWEep:TIME 93
[SOURce:]SWEep:STATe 94
This section describes the Frequency sweep commands used to configure
the sweep settings of the U2761A. These commands allow you to set the
start and stop frequency values, sweep spacing, sweep time, and sweep
state.