Technical data

Shift Keying Commands 7

U2761A Programmer’s Reference 87

[SOURce:]PSKey:STATe

Syntax

[SOURce:]PSKey:STATe {0|OFF|1|ON}

This command disables or enables the phase-shift keying (PSK)

modulation.

[SOURce:]PSKey:STATe?

This query returns the PSK modulation state as 0 if the modulation is

disabled, and 1 if the modulation is enabled.

Parameter

Remark

The U2761A allows only one modulation mode to be enabled at a time,

and does not allow modulation when sweep is enabled.

Examples

The following command enables the PSK modulation.

PSK:STAT ON

The following query returns the modulation state.

PSK:STAT?

Typical response:

Item Type Range of values Default value

state Boolean 0|OFF|1|ON 0

SOUR : PSK space

0|OFF

1|ON

:STAT