Technical data

7 Shift Keying Commands
86 U2761A Programmer’s Reference
[SOURce:]PSKey:INTernal:RATE
Syntax
[SOURce:]PSKey:INTernal:RATE <rate in Hz>
This command sets the rate at which the output phase “shifts” between
two preset phases.
[SOURce:]PSKey:INTernal:RATE?
This query returns the phase-shift keying (PSK) rate in Hz.
Parameter
Remark
The modulating waveform is a Square wave with a 50% duty cycle.
Examples
The following commands sets the PSK rate to 100 Hz.
PSK:INT:RATE 100
The following query returns the PSK rate.
PSK:INT:RATE?
Typical response:
+1.0000000000000E+02
Item Type Range of values Default value
rate Numeric 2 mHz to 100 kHz 10 Hz
SOUR : PSK space
?
rate in Hz:INT :RATE