Technical data

6 Modulation Commands

68 U2761A Programmer’s Reference

[SOURce:]AM:STATe

Syntax

[SOURce:]AM:STATe {0|OFF|1|ON}

This command disables or enables the amplitude modulation.

[SOURce:]AM:STATe?

This query returns the amplitude modulation state as 0 if the modulation

is disabled, or 1 if the modulation is enabled.

Parameter

Remark

The U2761A allows only one modulation mode to be enabled at a time,

and does not allow modulation when sweep is enabled.

Examples

The following command enables the amplitude modulation.

AM:STAT ON

The following query returns the modulation state.

AM:STAT?

Typical response:

Item Type Range of values Default value

state Boolean 0|OFF|1|ON 0

SOUR : AM space

0|OFF

1|ON

:STAT