Technical data

4 Output Configuration Commands
44 U2761A Programmer’s Reference
[SOURce:]FREQuency
Syntax
[SOURce:]FREQuency <frequency>
This command sets the output frequency.
[SOURce:]FREQuency?
This query returns the frequency setting in Hz for the currently selected
function.
Parameter
Examples
The following command sets the output frequency to 2 kHz.
FREQ 2000
The following query returns the output frequency setting.
FREQ?
Typical response:
+2.0000000000000E+03
Item Type Range of values Default value
frequency Numeric • 1 μHz to 20 MHz (for sine and square)
• 1 μHz to 200 kHz (for ramp and arbitrary)
• 500 μHz to 5 MHz (for pulse)
1 kHz
SOUR : FREQ space
?
frequency