Technical data

APPLy Commands 3
U2761A Programmer’s Reference 37
APPLy:DC
Syntax
APPLy:DC [<frequency|DEFault> [,<amplitude>|DEFault>
[,<offset>] ]]
This command outputs a DC voltage with the level specified by the offset
parameter. The DC voltage is output as soon as the command is executed.
Parameters
Remarks
The frequency and amplitude parameters have no effect for the DC output
but you must specify a value or DEFault. If you specify a frequency and
amplitude, the values are remembered when you change to a different
function.
Example
The following command sets the output frequency and amplitude to
DEFault, and output offset to –2.5 V.
APPL:DC DEF, DEF, –2.5
Item Type Range of values Default value
frequency|DEFault Numeric N/A DEFault
amplitude|DEFault Numeric N/A DEFault
offset Numeric • ±2.5 V (Into 50 Ω load)
• ±5 V (Into open circuit)
0 V
APPL :DC space frequency , amplitude , offset
DEF DEF