Technical data

13 Status Reporting Commands
126 U2761A Programmer’s Reference
STATus:QUEStionable:ENABle
Syntax
STATus:QUEStionable:ENABle <value>
This command enables the bits in the Questionable Data enable register.
The selected bits are then reported to the Status Byte register. The enable
register is a mask for enabling specific bits from the Questionable event
register to set the questionable summary bit (QUES) of the Status Byte
register. This bit (bit 3) is the logical OR of all the Questionable event
register bits that are enabled by the Questionable enable register.
STATus:QUEStionable:ENABle?
This query returns the binary-weighted sum of all bits set in the enable
register.
Parameter
Remarks
• The STATus:PRESet command will clear all bits in the enable register.
• For more information on the Questionable enable register, refer to
Chapter 1, “Status system diagram” on page 12. The bit definitions for
the Questionable Data register are listed in “Questionable Data
register” on page 13.
Item Type Range of values Default value
value Numeric A decimal value which corresponds to the
binary-weighted sum of the bits in the register
0
STAT space:QUES :ENAB value