Technical data

Phase-Lock Commands 12
U2761A Programmer’s Reference 121
OUTPut:PHASe[:STATe]
Syntax
OUTPut:PHASe[:STATe] {0|OFF|1|ON}
This command disables or enables the 10 MHz reference phase output.
OUTPut:PHASe[:STATe]?
This query returns the phase output state as 0 if the output is disabled,
or 1 if the output is enabled.
Parameter
Examples
The following command enables the phase output.
OUTP:PHAS ON
The following query returns the phase output state.
OUTP:PHAS?
Typical response:
1
Item Type Range of values Default value
state Boolean 0|OFF|1|ON 0
OUTP :PHAS space
?
0|OFF
1|ON
:STAT