Technical data

12 Phase-Lock Commands
118 U2761A Programmer’s Reference
UNIT:ANGLe
Syntax
UNIT:ANGLe {DEGree|RADian}
This command sets either degrees or radians for the phase offset value.
UNIT:ANGLe?
This query returns the selected unit as DEG or RAD.
Parameter
Examples
The following command sets the phase offset unit to degrees.
UNIT:ANGL DEG
The following query returns the phase offset unit.
UNIT:ANGL?
Typical response:
DEG
Item Type Range of values Default value
unit Discrete DEGree|RADian DEGree
UNIT space
?
:ANGL DEG
RAD