Manualshelf

User's Manual

ManualsBrandsAgilent Technologies ManualsWhiteboard AccessoriesAgilent Technologies Agilent Technologies Whiteboard Accessories E6385A
71727374757677787980
Performing Tests
Spectrum Analyzer
Chapter 4
O:\Manuals\E6385A_Amps\Book\perftst.fm
76
Use the Ref Level and Span fields for the best view of the transmitted signal.
Read the marker frequency and level in the upper-right of the display. To change the
marker position, use the Controls field to select Marker, then use the Position field.
NOTE Do not make changes to the Center Freq field.
If you would like to view another channel/frequency, return to the Lucent Amps Test
Main Menu screen and select Test Configuration (to access the Test Configuration
Menu screen) and change the Channel Number, then re-run the test.
When you have finished using the spectrum analyzer, press the
Pause/Continue key. The
Test Software will return to the Test Selections Menu screen.