User's Manual

Performing Tests
Overview
Chapter 4
63
Performing Tests
Selecting Utilities
Select calibration and support utilities by loading and running the Test Software (see
“Loading and Running the Test Software” on page 23) and selecting the
Calibration/Utilities field on the Lucent CDMA Tests Main Menu screen. The Test
Software will display the Calibration/Utilities Menu screen (see Figure 4-3).
Figure 4-3 Calibration/Utilities Menu Screen
Once you have selected a calibration procedure to run, see the following list to locate the
description of that procedure.
• “TX Antenna Port Cable Calibration” on page 84.
• “TX Test Port Cable Calibration” on page 86.
• “TX Test Port Coupling Measurements” on page 88.
• “Insertion Loss Measurement” on page 91.
• “Return Loss Measurement” on page 93.
Once you have selected a support utility procedure to run, see the following list to locate
the description of that procedure.
• “Defining a Frequency Plan” on page 43.
• “Printing the FCC Title Page” on page 41.