User's Manual

Performing Tests
Overview
Chapter 4
O:\Manuals\E6385A_Amps\Book\perftst.fm
62
Selecting Tests
Select tests by loading and running the Test Software (see “Loading and Running the
Test Software” on page 23) and selecting the Test Selections field on the Lucent
CDMA Tests Main Menu screen. The Test Software will display the Test Selections
Menu screen (see Figure 4-2).
Once you have selected a test to run, see the following list to locate the description of
that test.
• “Full Site Test (FCC)” on page 65.
• “Single Radio Test” on page 68.
• “TX Power Adjustment” on page 71.
• “Spectrum Analyzer” on page 74.
• “RX Gain Test” on page 79.
• “TX Gain Test” on page 77.
• “TX –39 dBm Power Test” on page 81.
Figure 4-2 Test Selections Screen