User's Manual
95
3
3Specifications
In this chapter you will find the specifications of the Agilent 81130A
Pulse Generator and its output modules Agilent 81131A and Agilent
81132A.
At the end of this chapter, Pulse Parameter Definitions on page 111
provides detailed information on the definition of the pulse parameters
used by the instrument.
NOTE
Warranted Performance
Specifications describe the instruments warranted performance. Non-
warranted values are described as typical. All specifications apply after a
30 minute warm-up phase with 50 Ohm source, a 50 Ohm load resistance
and separate channels. They are valid from 0 °C to 55 °C ambient
temperature.