User's Manual

Programming Reference

SCPI Instrument Command List

Specified Limits

Agilent 81131A: 1.95 V to 3.75 V

Agilent 81132A: 1.95 V to 2.95 V

Value coupling

Range coupling

Amplitude

Description

This command programs the offset voltage of the OUTPUT signal. Note

that to set the OUTPUT levels in terms of voltage, you first have to

execute the

[:SOURce]:HOLD VOLTage

command to enable the

[:SOURce]:VOLtage

subsystem.

The available voltage range is limited by the specified current limits.

Example

:HOLD VOLT

Enable VOLTAGE subsystem

:VOLT1:OFF -800MV

Set OUTPUT 1 offset

to 800mV

Command

:VOLT[1|2]:HIGH

Long

[:SOURce]:VOLTage[1|2][:LEVel][:IMMediate]:HIGH

Form

Set & Query

Parameter

Numeric

Parameter suffix

with engineering prefixes.

*RST value

500 mV

Specified Limits

Agilent 81131A: 1.90 V to 3.80 V

Agilent 81132A: 1.90 V to 2.50 V

Value coupling

High = Offset +

Amplitude

Low = Offset –

Amplitude

Amplitude = High – Low

Offset =

High – Low