User's Manual

The Rear Panel at a Glance

1 Chassis ground

2 Power-line fuse-holder assembly

3 Power-line voltage setting

4 AM modulation input terminal

5 External Trigger / FSK / Burst modulation

input terminal

6 GPIB (IEEE-488) interface connector

7 RS-232 interface connector

Use the front-panel Input / Output Menu to:

 Select the GPIB or RS-232 interface (see chapter 4 in User’s Guide).

 Set the GPIB bus address (see chapter 4 in User’s Guide).



Set the RS-232 baud rate and parity (see chapter 4 in User’s Guide).