User's Manual

Menu Example 2 Some commands in the menu require that you enter a numeric
parameter value. The following steps show you how to enter a number in
the menu. For this example, you will change the output amplitude.
Ampl 1 Select amplitude adjustment
The function generator displays the current output amplitude.
100.0 mVPP
< 2 Move the flashing cursor over to edit the first digit.
The cursor movement wraps around.
100.0 mVPP
^ ^ ^ 3 Increment the first digit until 300.0 mVPP is displayed.
1
The output amplitude of the function changes as you adjust the
displayed value.
300.0 mVPP
1
You can also use the knob and arrow keys to enter a number.
3
Chapter 3 Front-Panel Menu Operation
A front-panel menu tutorial
43