User's Manual

Table Of Contents

Product Description

The Test Set is a single instrument that combines the features of 22

individual radio test instruments. The Test Set is designed to meet the

communication test needs of both service and manufacturing

environments, and the capability to test land mobile radios, cellular

phones, and various other communications systems.

Test and troubleshooting time is decreased by simplifying standard

measurement tasks and providing the required measurement capability

in a single instrument. Transmitters and receivers are characterized

with single-key RX, TX and duplex tests. Each of these tests displays a

specialized screen that provides access to the necessary controls and

measurement results. Measured results may be displayed as digital

readouts and/or bar graphs. All settings and measurements are easily

accessed and changed using the front-panel knob and keys. If desired,

all settings can be saved in nonvolatile save/recall registers for future

access.

The various ports on the Test Set allow the receiver/transmitter being

tested to be quickly connected. A receiver with 2

µV sensitivity

(typically <1 µV) is available through the ANT IN port, for off-the-air

monitoring of low-level signals. Transmitter measurements of high-

power signals of up to 100 W intermittently (for 10 seconds) or 60 W

continuous can be performed without the use of external attenuators.