User's Manual
Table Of Contents
- Agilent Technologies 16750A/B Logic Analyzer
- Agilent Technologies 16750A/B Logic Analyzer
- Contents
- Getting Started
- Step 1. Connect the logic analyzer to the device under test
- Step 2. Choose the sampling mode
- Step 3. Format labels for the probed signals
- Step 4. Define the trigger condition
- Step 5. Run the measurement
- Step 6. Display the captured data
- For More Information...
- Example: Timing measurement on counter board
- Example: State measurement on counter board
- Task Guide
- Probing the Device Under Test
- Choosing the Sampling Mode
- To select transitional timing or store qualified
- Formatting Labels for Logic Analyzer Probes
- Setting Up Triggers and Running Measurements
- Displaying Captured Data
- Using Symbols
- Printing/Exporting Captured Data
- Cross-Triggering
- Solving Logic Analysis Problems
- Saving and Loading Logic Analyzer Configurations
- Reference
- The Sampling Tab
- The Format Tab
- Importing Netlist and ASCII Files
- The Trigger Tab
- The Symbols Tab
- Error Messages
- Must assign Pod 1 on the master card to specify actions for flags
- Branch expression is too complex
- Cannot specify range on label with clock bits that span pod pairs
- Counter value checked as an event, but no increment action specified
- Goto action specifies an undefined level
- Maximum of 32 Channels Per Label
- Hardware Initialization Failed
- Must assign another pod pair to specify actions for flags
- No more Edge/Glitch resources available for this pod pair
- No more Pattern resources available for this pod pair
- No Trigger action found in the trace specification
- Slow or Missing Clock
- Timer value checked as an event, but no start action specified
- Trigger function initialization failure
- Trigger inhibited during timing prestore
- Trigger Specification is too complex
- Waiting for Trigger
- Analyzer armed from another module contains no "Arm in from IMB" event
- Specifications and Characteristics
- Concepts
- Understanding Logic Analyzer Triggering
- Understanding State Mode Sampling Positions
- Getting Started
- Glossary
- Index
Contents
9
Error Messages 170
Must assign Pod 1 on the master card to specify actions for flags 171
Branch expression is too complex 171
Cannot specify range on label with clock bits that span pod pairs 176
Counter value checked as an event, but no increment action specified 177
Goto action specifies an undefined level 177
Maximum of 32 Channels Per Label 177
Hardware Initialization Failed 178
Must assign another pod pair to specify actions for flags 178
No more Edge/Glitch resources available for this pod pair 178
No more Pattern resources available for this pod pair 179
No Trigger action found in the trace specification 179
Slow or Missing Clock 180
Timer value checked as an event, but no start action specified 180
Trigger function initialization failure 181
Trigger inhibited during timing prestore 182
Trigger Specification is too complex 182
Waiting for Trigger 184
Analyzer armed from another module contains no "Arm in from IMB"
event 185
Specifications and Characteristics 186
Agilent 16750A/B Logic Analyzer Specifications 186
Agilent 16750A/B Logic Analyzer Characteristics 186
What is a Specification? 189
What is a Characteristic? 189