User manual

Agilent 1260 Infinity High Performance Autosampler User Manual 51
Using the Module
4
Setting up the Autosampler with Agilent ChemStation
Setting up the Autosampler with Agilent ChemStation
The setup of the Autosampler is shown with the Agilent ChemStation
B.04.02. SP1 DSP3. Depending on the controller (e.g. Agilent Instant Pilot,
EZChrom Elite) the screens look different. For the Instant Pilot refer to
“Main Screens of the Autosampler with Agilent Instant Pilot (G4208A)” on
page 61.
NOTE
This section describes the autosampler settings only. For information on the Agilent
ChemStation or other 1260 Infinity modules refer to the corresponding documentation.