User manual

Agilent 1260 Infinity High Performance Autosampler User Manual 143
Maintenance
9
Installing the Interface Board
Installing the Interface Board
1 Switch OFF the autosampler at the main power switch.
2 Disconnect cables from the interface board connectors.
3 Loosen the screws. Slide out the interface board from the autosampler.
4 Install the interface board. Secure the screws.
5 Reconnect the cables to the board connectors.
When At installation or when defective.
Tools required Description
Flat head screwdriver
Parts required # Description
1 Interface board
CAUTION
Electronic boards are sensitive to electrostatic discharge (ESD) and should be handled
with care so as not to damage them. Touching electronic boards and components can
cause electrostatic discharge.
ESD can damage electronic boards and components.
➔ Be sure to hold the board by the edges and do not touch the electrical components.
Always use an ESD protection (for example, an ESD wrist strap) when handling
electronic boards and components.
HXgZlh