Technical information

7
Vial and Well Locations for the Available Tray Types
384-Well Plates (Agilent Only)
38 Agilent 1200 Series Getting Connected Guide Thermo Scientific
384-Well Plates (Agilent Only)
You can load two 384-well plates into the tray compartment of the Agilent 1200 HiP-ALS.
Xcalibur recognizes these plates as the front and back well plates in the left side of the tray
compartment.
Figure 27 shows the well locations for the 384-well plates (factory default setting of
Left/Back) and the vial locations for the 2 mL vials.
When you create a sequence, you can type a well location from 1:A1 to 1:P24 for the front
well plate, from 2:A1 to 2:P24 for the back well plate, and from 3:A1 to 3:J1 for the vials.
If you turn on the wash option for an instrument method, you can specify a well location
from 1:A1 to 2:P24 or a reservoir location from 1 to 10.
Figure 27. Schematic of the 384-well plate tray with the plate rotation selection of Left/Back
Injection port
A
B
C
D
E
F
G
H
I
J
Plate 3 (10 × 2 mL vials)
124
Plate 1
Plate 2
Row 1
Row 10
Column
(sequence location = 3:A1)
(wash vial location = 1)
Row 16
Row 1
P
A
Row 16
Row 1
P
A