Technical information

7
Vial and Well Locations for the Available Tray Types
96-Well Plates or 96-Deep Well Plates (Agilent Only)
Thermo Scientific Agilent 1200 Series Getting Connected Guide 37
96-Well Plates or 96-Deep Well Plates (Agilent Only)
You can load two 96-well plates or 96-deep well plates into the tray compartment of the
Agilent 1200 HiP-ALS. Xcalibur recognizes these plates as the front and back well plates in
the left side of the tray compartment.
Figure 26 shows the well locations with the factory default setting of Left/Back for the plate
rotation.
When you create a sequence, you can type a well location from 1:A1 to 1:H12 for the front
well plate, from 2:A1 to 2:H12 for the back well plate, and from 3:A1 to 3:J1 for the vials.
If you turn on the wash option for an instrument method, you can specify a well location
from 1:A1 to 2:H12 or a reservoir location from 1 to 10.
Figure 26. Schematic of the 96-well plate tray option with the plate rotation selection of Left/Back
112
Injection port
A
B
C
D
E
F
G
H
I
J
Plate 1
Plate 2
Plate 3 (10 × 2 mL vials)
Columns
Row 8
Row 1
H
A
Row 8
Row 1
H
A
Row 1
Row 10
2:A1
1:A1
Column 1
(sequence location = 3:A1)
(wash vial location = 1)