Technical information

3
Setting Up the Xcalibur Instrument Configuration
Specifying the Configuration Options for the Agilent LC System
Thermo Scientific Agilent 1200 Series Getting Connected Guide 17
Y To add devices to the instrument configuration
1. If you have not already done so, open the Instrument Configuration program.
2. Under Available Devices, double-click the icon for the device that you want to add. Or,
click the icon for the device that you want to add, and then click Add.
A duplicate of the device icon appears under Configured Devices.
Step 3: Specifying the Configuration Options for the Devices
To specify the configuration options for the Agilent 1200 Series devices that Xcalibur
supports, follow these procedures:
• Configuring the Agilent 1200 Series HiP-ALS
• Configuring the Agilent 1200 Series Pump
• Configuring the Agilent 1200 Series TCC
• Configuring the Agilent 1200 Series Diode Array Detector
Configuring the Agilent 1200 Series HiP-ALS
Use the Agilent 1200 HiP-ALS dialog box to specify the module name; the stack IP address;
configurable instrument options such as the syringe, seat capillary, and loop capillary size; the
tray type you are using; and whether the system has an optional thermostat unit.
Y To specify the configuration options for the Agilent 1200 Series HiP-ALS
1. Under Configured Devices, double-click .
The Agilent 1200 G1367 HiP-ALS dialog box appears.
2. Click the General tab.
The General page appears (see Figure 12).