Technical information

2
Setting Up the LAN Interface
Step 3: Setting the Stored TCP/IP Address with a Telnet Session
10 Agilent 1200 Series Getting Connected Guide Thermo Scientific
Figure 6. Run dialog box
b. In the Open box, type cmd.
c. Click OK.
The DOS command window appears (see Figure 7).
Figure 7. DOS command window
d. At the DOS prompt, type cd c:\, and then press ENTER.
e. At the C:\> prompt, type telnet 192.168.254.11 (Figure 8).
Figure 8. DOS command window with default IP address