User manual

40 G1369A LAN Interface User Manual
2Getting Started
PC and Agilent ChemStation setup
Agilent ChemStation setup
1 Start the Configuration Editor of the Agilent ChemStation.
Figure 35 Changing the TCP/IP settings of the Agilent ChemStation
2 Add a TCP/IP connection to communicate with the LAN Interface. Use the
IP address of the LAN Interface.
3 Save the configuration, close the Configuration Editor and start the Agilent
ChemStation.
NOTE
If using a corporate LAN, IP addresses need to be supplied by the responsible IT
department. Also the LAN needs to be able to handle additional traffic.