User manual

36 G1369A LAN Interface User Manual
2Getting Started
Manual configuration
Figure 29 LAN Interface Status Page (complete)
6 To change the TCP/IP settings, press F1 “Service”.
Figure 30 Entering the Service Mode
Agilent Technologies G1369A
FW Revision : A.01.01
MAC Address : 0030d3060122
--------------------------------
Init Mode : Bootp
Bootp Server : 134.40.30.184
--------------------------------
TCP/IP Properties
- active -
IP Address : 134.40.24.230
Subnet Mask : 255.255.248.0
Def. Gateway : 134.40.24.1
- stored -
IP Address : 134.40.24.160
Subnet Mask : 255.255.248.0
Def. Gateway : 134.40.24.1
--------------------------------
TCP/IP Status : Ready
--------------------------------
Controller : not connected