User manual

34 G1369A LAN Interface User Manual
2Getting Started
Manual configuration
With Handheld Controller
To configure the TCP/IP parameters before connecting the card to the
network, the Handheld Controller (G1323B with firmware B.02.02 or above
for 1100 series modules only, see LAN Interface compatibility 12.) can be
used.
1 Press F5 “Views”, select “System” and press the “Enter” key.
2 Press F2 “Configure”, select the module where the LAN Interface is
installed and press the “Enter” key (Figure 25).
Figure 25 Select module
3 Press F1 “Interfaces”, select “MIO” and press the “Enter” key (Figure 26).
Figure 26 Select MIO