User manual

G1369A LAN Interface User Manual 27
Getting Started 2
Automatic configuration with Bootp
Figure 18 Bootp Manager
9 Press Apply to activate the changes.
10 Press OK to exit the Bootp Manager and power cycle the instrument with
the LAN Interface, to force it to send a new bootp request again. This time,
the MAC address will be recognized by the Bootp Server (Figure 19). It will
send the configured IP address and subnet mask information which are
necessary for communication to the LAN Interface.
Figure 19 Bootp Server - 1100 module found
IP address PC is
134.40.30.184
IP address LAN
Interface is
134.40.24.230