User manual

26 G1369A LAN Interface User Manual
2Getting Started
Automatic configuration with Bootp
6 Specify the Host Name (LC1100-01), the IP address (134.40.24.230), the
Comment (LC1100-01) and the Subnet Mask 255.255.248.0 and the Gateway
(134.40.24.1).
Figure 17 Add Bootp Entry - Enter your parameter
7 Exit with OK.
8 Select Configure -> Bootp Manager. All entries made above are shown in
Figure 18 on page 27.
NOTE
If you are working in a network system, you need your own addresses. Contact your local IT
group.