User manual

G1369A LAN Interface User Manual 25
Getting Started 2
Automatic configuration with Bootp
The MAC or hardware address of the LAN Interface is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label on the card, see Figure 6 on
page 15.
Figure 15 Bootp Server
4 Identify your LAN Interface by the MAC address, see Figure 15.
5 Select Configure -> Add Entry to configure the Bootp Manager (Figure 17).
The drop down box “MAC address” lists all MAC addresses found. Select
your MAC address. If no hardware address is found, select Cancel and
repeat step 3 and step 4.
Figure 16 Add Bootp Entry - Select the MAC address
NOTE
If you are working in a network system, you may see other LAN Interfaces appear,
overwriting your LAN Interface information periodically.