User manual

10 G1369A LAN Interface User Manual
1 Introduction - Around your LAN Interface
Introduction to the LAN Interface
LAN control configurations
The basic LAN configurations are shown below.
Local configuration using cross-over cable
The simplest way is a configuration with a single system.
Figure 2 Local configuration using cross-over cable
LAN using a HUB and twisted pair cables
More complicated setup than direct cross-over connection.
Figure 3 LAN configuration using a HUB and twisted pair cables
Patch-cable Cross-over Shielded 3 m (5023-0203)
Patch-cable Twisted pair Shielded
7 m (5023-0202) for all cables