User manual

G1369B LAN Interface User Manual 49
Getting Started 2
PC and Agilent ChemStation Setup
Agilent ChemStation Setup
1 Start the Configuration Editor of the Agilent ChemStation.
Figure 40 Changing the TCP/IP settings of the Agilent ChemStation
2 Add a TCP/IP connection to communicate with the LAN Interface. Use the
IP address of the LAN Interface.
3 Save the configuration, close the Configuration Editor and start the Agilent
ChemStation.
NOTE
If using a corporate LAN, IP addresses need to be supplied by the responsible IT
department. Also the LAN needs to be able to handle additional traffic.