User manual

G1369B LAN Interface User Manual 43
Getting Started 2
Manual Configuration
With Handheld Controller G1323B
To configure the TCP/IP parameters before connecting the card to the
network, the Handheld Controller (G1323B with firmware B.02.02 or above
for 1100/1200 series modules only, see “LAN Interface Compatibility” on
page 13) can be used.
1 Press F5 “Views”, select “System” and press the “Enter” key.
2 Press F2 “Configure”, select the module where the LAN Interface is
installed and press the “Enter” key (Figure 30).
Figure 30 Select module
3 Press F1 “Interfaces”, select “MIO” and press the “Enter” key (Figure 31).
Figure 31 Select MIO