User manual

34 G1369B LAN Interface User Manual
2Getting Started
Automatic Configuration with Bootp
Figure 22 Bootp Manager
9 Press Apply to activate the changes.
10 Press OK to exit the Bootp Manager and power cycle the instrument with
the LAN Interface, to force it to send a new bootp request again. This time,
the MAC address will be recognized by the Bootp Server (Figure 23). It will
send the configured IP address and subnet mask information which are
necessary for communication to the LAN Interface.
Figure 23 Bootp Server - module found
IP address PC is
134.40.30.184
IP address LAN
Interface is
134.40.24.230